Extreme Series

View Extreme ti & tiR Remote Controller Specification
View Owner Manual

Additional Options/Upgrades:

• Exterior Grille $169
• Ducting Plenum $149
• 24V Thermostat Conversion Kit Y/N
• Condenser Coil Coating $100
• Extreme tiR Filters $13.48

Features: 

• Variable-speed fans 
• Reliable starting and running performance, even under the most extreme outdoor conditions
• Cooling unit can be located up to 25 ducted feet from the cellar
• KDT Digital Controller/Thermostat with 50-ft. cable
• Quiet operation technology delivers sound levels as low as 51 db
• 55°F temperature differential
• Standard and 24V thermostat options available

Owners Manual

Description: 

The Extreme Series was designed with easy installation in mind. The Extremes and the SC Series do not require an HVAC-R technician for installation. There are three different versions of our extreme units:

Extreme tiR fully ducted (FD): This product is intended for fully ducted installations. Fully ducted units are for customers who don’t want to see their unit in the cellar. The duct plenums for the evaporator and condenser will be included with your purchase. This unit also comes with a KDT Plus remote controller and thermostat. The controller can be mounted outside the cellar, allowing you to monitor your cellar temperature without needing to enter. The controller can be mounted up to 50 feet away from the Extreme unit.

Note: If you are planning to place this unit in the attic and use ducting, please contact our sales team for pricing. You may not need ducting equipment for the condenser side of the system.

Extreme tiR Self Contained: This product is intended for through-the-wall installations. It is an “upgrade” to the Extreme ti because it uses the KDT Plus remote controller and thermostat. The duct plenums for the evaporator and condenser can be purchased separately. The controller can be mounted outside the cellar, allowing you to monitor your cellar temperature without needing to enter. The controller can be mounted up to 50 feet away from the Extreme unit.

Note: If this unit will be installed through an exterior wall, you will need to purchase an exterior housing to protect the unit. If this unit will be installed through an interior wall, the hot air exhaust may be redirected to another location using the condenser ducting plenum kit.

Extreme ti: This product functions in the same way as the tiR and is intended for through-the-wall installation. The difference between the ti and tiR is that the controller and display will be located on the front face of the unit. In order to monitor your cellar conditions, you will need to physically enter your cellar.

Note: 

• The use of the 24-volt thermostat conversion kit eliminates the thermostat normally included with the system and allows your contractor to select, purchase and install the thermostat technology of your choice, including but not limited to Nest, Ecobee, and Honeywell. By selecting the 24V Thermostat Conversion Kit, you have acknowledged that the system will not be built with the standard WhisperKOOL control or liquid measuring bottle probe. You will have to source and purchase your own 24V thermostat to run the equipment.
• tiR filters should be replaced every three months. 

YouTube Video: https://youtu.be/4ktsQqpT59A

Extreme with Remote KDT Controller